How to clean a Thermos bottle: remove the gaskets and let every part dry
If cleaning your Thermos bottle means a quick rinse, check the removable gaskets and drinking spout too. This guide uses Thermos Korea's care advice to explain everyday washing, drying, and the points where you need your particular model's manual.

Based on the sources linked below. The photograph is for illustration.
Before you start
STEP BY STEP
Here’s how
Identify the removable parts in your model's manual
Match the bottle's model number to its instruction manual first. Thermos Korea explains that cleaning methods and dishwasher or dish-dryer compatibility vary by product and component. Instructions for a different lid design may not apply to yours. Find the body, stopper, gaskets, and drinking spout in the diagram, and check which parts are intended for user removal. As an organizing suggestion from Whentip, lay removed parts out in order so you can compare their positions when reassembling. If a part will not come away, check the instructions again before pulling harder.
Wash removable gaskets and the drinking spout separately
Empty the bottle, then remove the gaskets, spout, and other parts that your manual permits you to detach. The manufacturer's everyday-care advice is to clean promptly after use, using dishwashing detergent diluted in lukewarm water for ordinary dirt. For example, if you normally rinse only the inside and close the lid, change the routine to check each removable component. Washing the body does not also clean a detached gasket. Follow your manual for the detergent amount and the washing method for each part.
Do not leave the bottle body soaking in water
Using water to wash the bottle is different from leaving the entire body submerged. Thermos warns that water entering gaps can lead to rust or impaired insulation, so do not leave the body sitting in water. Avoid attacking stubborn marks with a metal scourer or abrasive cleaner. The official advice mentions edible vinegar or citric acid for some deposits, but this guide does not prescribe a concentration or soaking time for every model. Check your model's directions before treating a remaining stain separately.
Let the washed parts dry thoroughly before reassembly
After washing and rinsing, keep the body and removable components separate while they dry thoroughly. Look beyond the outer surface: check the gasket and drinking spout for remaining moisture before putting them back. Boiling parts is prohibited in the manufacturer's care guidance. Compare each part's position and orientation with the manual when reassembling. If the lid no longer closes normally or a component will not sit in place, check the assembly before using the bottle. Do not solve the problem by leaving a required part out.
Check dishwasher rules separately from storage advice
If you want to use a dishwasher, check whether the body and lid are each approved for it. Do not use a dishwasher or dish dryer for a product whose manual prohibits it. Stainless steel construction alone does not establish compatibility. For long-term storage, the official advice is to wash and dry the bottle thoroughly and keep it away from hot, humid places. If you cannot find the instructions or something still seems wrong after cleaning, contact Thermos support with the model number.
Sources & further reading
Thermos Korea official store — Care precautions ↗Thermos Korea official store — Dishwasher and dish-dryer compatibility ↗Some sources are in Korean. Check the original guidance for current product, store or software conditions.
Read this article in Korean →
