How to clean a stainless steel sink: follow the grain and dry away water marks
If water marks remain after washing up, check the drying step before adding more cleaner. Follow this routine for an ordinary brushed stainless steel sink, and check the finish before applying it to a specially treated surface.

Based on the sources linked below. The photograph is for illustration.
Before you start
STEP BY STEP
Here’s how
1. Identify the finish, not just the metal
Check that the sink is stainless steel, then look up its finish and approved care method. The dish-soap routine here follows BLANCO's general stainless steel care guidance. Its Durinox finish has different instructions: a damp microfiber cloth or soft sponge without detergent for daily care. A colored coating or special surface treatment needs its own instructions, even if the material underneath is stainless steel.
2. Start with the soft side of a sponge
Remove dishes and cleaning tools so you can reach the surface. Apply dish soap to the soft side of a wet sponge, as BLANCO recommends for routine cleaning. Do not confuse this with scrubbing with the abrasive side. Test a new cleaning product on a small, inconspicuous area first, following KOHLER's general advice. A visible mark is not a reason to jump straight to an abrasive or stronger chemical.
3. Wipe along the grain
Look for the fine lines in a brushed finish and move in that direction. Change your viewing angle if they are hard to see. Both BLANCO and KOHLER advise following the grain. Avoid circular scrubbing or aggressively polishing one spot. BLANCO warns that these can alter the surface or leave uneven shine. The goal here is routine cleaning, not refinishing the sink.
4. Rinse, then finish with a microfiber cloth
Rinse away the soap with clean water, then wipe dry with a microfiber cloth along the grain. Puddles or droplets left in the bowl mean the finishing step is still incomplete. KOHLER explains that evaporating water can leave deposits, which is why it recommends drying after use. For example, after evening washing-up, add a final wipe to your routine before deciding that more cleaner is needed.
5. Investigate persistent marks before scrubbing harder
If a mark remains when the sink is dry, stop repeatedly rubbing it and check the model's instructions for deposits or discoloration. Routine cleaning cannot remove every stain or scratch. If you cannot identify an approved product and method, contact the manufacturer with the finish details and a photo of the mark. Do not turn this daily routine into an improvised acid treatment or abrasive refinishing job.
Sources & further reading
BLANCO — Everyday stainless steel sink care ↗BLANCO — Care for different finishes and precautions ↗KOHLER — Kitchen sink care ↗Some sources are in Korean. Check the original guidance for current product, store or software conditions.
Read this article in Korean →
