← Living
Living

Samsung washer drain filter cleaning: drain the water and refit both caps

Worried about water spilling when cleaning your Samsung front-load washer's drain filter? Prepare to collect the remaining water before turning the filter. These steps cover machines with an emergency drain hose and a user-removable filter.

A laundry room with a washing machine and shelving

Based on the sources linked below. The photograph is for illustration.

Before you start

STEP BY STEP

Here’s how

01

1. Locate the correct cover and disconnect power

Stop the wash, switch the machine off and unplug it. Water remaining after a hot wash can cause burns, so allow it to cool before working. Never remove the filter while the washer is running. Cover locations and opening mechanisms vary. Do not assume it is at the lower left or force the cover; consult the manual. This guide applies to a design with an emergency drain hose and a filter users can remove.

02

2. Collect the water while keeping hold of the hose

Place a towel and a shallow container below the filter area. Pull out the emergency drain hose and remove its end cap to release the water. Keep a second container nearby because there may be more water than expected. Samsung's Korean service guide warns that an uncapped hose can slip inside some models, requiring service. Keep hold of it. In an indoor location where spilling water would cause damage, do not skip draining before opening the filter.

03

3. Remove the filter and clear accessible debris

After draining, turn the filter counterclockwise to remove it. A safety-knob design requires pressing inward while turning. If it will not move, check the model's opening method instead of applying more force with tools. Inspect the filter and the opening for debris and clean with a soft brush. This does not authorize dismantling inaccessible internal parts. Request service if the filter stays stuck or the cover latch is faulty.

04

4. Refit the filter and hose cap separately

Align the filter, gently press it in and turn clockwise until securely seated. Close the emergency hose cap, return the hose to its recess and close the cover. Check the two closures separately so the hose cap is not overlooked after tightening the filter. Samsung warns that incorrect refitting or a missing cap can cause leaks or malfunction. Do not force a misaligned filter into place.

05

5. Distinguish other causes if drainage remains poor

Stop using the washer if water leaks on the next use and inspect the assembly. If it still will not drain, check for a crushed or twisted drain hose or suspected freezing and follow official guidance instead of repeatedly cleaning the filter. Water leaving the washer but backing up from the household drain may require a drain inspection. For example, noting whether water rises only around the external drain helps explain the situation to support. Persistent problems may require pump or other professional checks.

Sources & further reading

Samsung Korea service: drainage problems and filter cleaning ↗Samsung Korea service: filter removal, refitting and hose precautions ↗Samsung UK: emergency draining and filter cleaning safety ↗

Some sources are in Korean. Check the original guidance for current product, store or software conditions.

Read this article in Korean →