Samsung washer freeze prevention mode: Simple Control setup and the 16-hour limit
If your washer is on a cold enclosed balcony, check both support for Samsung's freeze prevention mode and how long it runs. This guide covers the empty-drum preparation, setting and follow-up check described for supported Simple Control front-loaders from the 2020 T series onward.

Based on the sources linked below. The photograph is for illustration.
Before you start
STEP BY STEP
Here’s how
1. Match the instructions to your model and controls
Check the model number and look for freeze prevention in its manual. The menu path here comes from Samsung's guidance for Simple Control front-loaders from the 2020 T series onward. Controls and operation differ across Samsung washers, so the purchase year alone is not enough to choose a button sequence. As a checking example, if your instructions describe a Delay/Spin button combination but your machine has a navigation dial, first check that the instructions match the model. A washer that already cannot fill or drain needs a separate check; choosing a prevention setting does not establish what is wrong.
2. Empty the drum and check the hose and door
Samsung specifies a connected inlet hose, a closed door and no laundry inside for this mode. Remove any wet washing instead of treating the function as a way to store it. Also check that the water supply and drainage arrangement follow the model's manual before starting. Disconnecting hoses to empty water is a separate manual prevention procedure. Do not mix a disconnected-hose setup with the preparation for a mode that takes in water. If you choose the manual procedure, read the power and water shut-off instructions in the additional source and check them against your model's manual.
3. Confirm that the mode has actually started
Turn on the washer. Hold Additional Functions for at least three seconds to enter System Settings. Use the navigation dial to select freeze prevention, then press OK. Check for the operating message; Samsung's Korean guidance shows 결빙방지중. Finding the menu is different from confirming that the mode is running. If the menu or display does not match, do not try button combinations for other model years in succession. Record the model number and displayed message, then check the manual or Samsung support for compatibility. This guide is based on published instructions, not a hands-on test of a particular washer.
4. Plan a check 16 hours after the start
The mode described here repeatedly fills and drains, then automatically ends after 16 hours. Note the start time and when to check again, rather than just the date you switched it on. Do not plan several days away on the assumption that one activation continues indefinitely. For example, 16 hours from 8 p.m. is noon the following day. That is a planning calculation; confirm the actual operating state on the washer. If cold conditions continue or you will be away for longer, consult the manual's additional prevention measures and support guidance.
Sources & further reading
Samsung Support Korea — freeze prevention and settings by washer model ↗Samsung Support Korea — preventing a washer from freezing in winter ↗Some sources are in Korean. Check the original guidance for current product, store or software conditions.
Read this article in Korean →