← Living
Living

Samsung range hood filter cleaning: soak, dry completely and reset the reminder

If your Samsung hood shows a cleaning reminder or has greasy filters, clean them before clearing the alert. This guide covers the hook-style filter in Samsung's instructions, including removal direction, soaking, drying and resetting.

Storage baskets on a wooden shelf; reference photograph

Based on the sources linked below. The photograph is for illustration.

Before you start

STEP BY STEP

Here’s how

01

1. Identify the filter and reminder on your model

The cited Samsung service guidance recommends cleaning after 60 accumulated operating hours or monthly, with a reminder based on accumulated time. Filter designs and controls vary, so compare your model's manual with the illustrated structure first. A filter looking clean does not make the timer a record of actual cleaning. Recording the cleaning date helps distinguish washing from merely clearing the alert. Stop cooking, let hot surroundings cool and follow the manual's safety preparations.

02

2. Release the hook, lower slightly and pull forward

Support a matching hook-style filter, lower the hook, let the filter down slightly and pull it toward you. Forcing it straight downward can deform the filter or hood. If it catches or the direction seems wrong, consult the diagram instead of pulling harder. Do not spray water onto a filter while it is fitted. Samsung's hood FAQ warns that spraying in place can create electrical-shock and fire risks.

03

3. Soak in lukewarm detergent solution for about 10 minutes

Soak the removed filter in lukewarm water with neutral detergent for about ten minutes, then rinse under running water. Use a soft cloth for remaining dirt. Samsung cautions against rough brushes or scourers that may damage the coating. Distinguish loosening grease by soaking from scrubbing aggressively. This guide uses handwashing. Check your model's manual separately for dishwasher permission and cycles; another model's test conditions are not universal instructions.

04

4. Dry completely and check the fit

Let the filter dry completely before reinstalling it in the reverse order. Inspect for gaps, distortion or incomplete engagement rather than assuming that one secured side means the job is finished. As a practical check suggested by Whentip, compare its position before and after fitting. Investigate visible gaps or a tilted fit before operation. Ask for service if it is bent or will not lock securely instead of forcing it back into shape.

05

5. Reset the timer after cleaning

For the light-and-mode-button design in the official guide, holding the light button for three seconds opens cleaning instructions and the mode button advances them. After cleaning, drying and refitting, press the light button to reset filter operating time. Follow the model-specific procedure if your controls differ. Resetting the reminder does not remove grease. If poor extraction or unusual noise continues after cleaning, record the model and symptoms for service rather than assuming the filter remains the only cause.

Sources & further reading

Samsung Korea service: aluminium hood filter cleaning ↗Samsung Korea service: filter reminder and reset ↗Samsung Korea: hood FAQ and NK90B8770-series cleaning precautions ↗

Some sources are in Korean. Check the original guidance for current product, store or software conditions.

Read this article in Korean →