Cleaning a Samsung bidet seat: use a wrung-out cloth, not a shower spray
If you plan to clean a Samsung bidet seat while washing the toilet, separate the two jobs. Follow the sequence for disconnecting power, wiping with a damp cloth, treating stubborn dirt and removing moisture.

Based on the sources linked below. The photograph is for illustration.
Before you start
STEP BY STEP
Here’s how
1. Separate seat cleaning from nozzle cleaning
This guide covers wiping the seat and exterior described by Samsung's service guidance. It does not cover extending the nozzle with a button or detaching the unit. Find the model number and check its exterior-cleaning instructions first. Being designed for a bathroom does not mean the unit can be sprayed with a shower. Keeping this job to surface cleaning helps avoid unnecessary disassembly or spraying.
2. Disconnect power and stop nearby spray cleaning
Samsung says to unplug before cleaning and keep water off the plug and socket. If the electrical connection is already wet, do not handle it to continue the job; arrange a safety check. For example, if you were about to hose down the toilet area, do not include the bidet housing in that wash. Samsung prohibits spraying the body directly or using a shower hose on it. Keep your water container away from electrical connections too.
3. Wipe with a soft cloth dampened and wrung out
Wet a soft cloth with clean water, wring it out and wipe the surface. Wiping with a damp cloth is different from pouring water over the unit. Adjust the moisture before starting so a dripping cloth does not wet the gaps. Whentip's suggested workflow is to clean one visible area at a time, folding the cloth to expose a clean side when it gets dirty. Working in sections makes it easier to see what remains and avoid transferring dirt back.
4. Use neutral detergent on the cloth for stubborn dirt
For heavier dirt, Samsung advises putting neutral detergent on a soft cloth, wiping, then following with a damp cloth. This is not an instruction to spray cleaner onto the product. Check the cleaner's label to confirm that it is neutral. Samsung warns against bleach, bathroom cleaners, thinner and benzene on the exterior. Do not mix products or switch to a stronger chemical because a stain remains. If the ingredients are unclear or the surface continues to change, contact service with the model number.
5. Remove moisture and inspect before use
Finish with a soft cloth to remove moisture. Wipe away any detergent residue with the damp cloth before drying. Do not reconnect power just to test the unit while moisture is still visible. If water may have entered the housing or electrical connection, a dry-looking exterior is not enough to resume use; seek service advice. For a separate nozzle-cleaning job, follow the instructions for that model rather than extending this exterior routine to the nozzle.
Sources & further reading
Samsung service — Cleaning the bidet seat and exterior ↗Some sources are in Korean. Check the original guidance for current product, store or software conditions.
Read this article in Korean →
