← Living
Living

Samsung robot vacuum carpet settings: lifting the mop versus avoiding the carpet

On supported 2026 Bespoke AI Steam models, carpet settings determine how the robot responds to a carpet during mopping. Find the SmartThings controls and choose between lifting the mop, avoiding carpet and automatic behavior.

A laundry room with a washing machine and shelving

Based on the sources linked below. The photograph is for illustration.

Before you start

STEP BY STEP

Here’s how

01

1. Check that your model is supported

Samsung's guidance lists VR90F015AG, VR90F01AAG/H, VR80F01SDG, VR80F01ADG/H, VR70F00SGG and VR70F00AGG/H. The Bespoke name alone does not establish that every model or model year supports these controls. If your number differs or its suffix is unclear, consult that model's manual. A missing menu does not by itself establish a sensor fault, and another model's instructions should not be forced onto yours.

02

2. Decide what should happen during mopping

Decide the desired result before opening the app. Going onto carpet with the mop raised is different from avoiding the carpet altogether. The automatic option lets the robot respond according to carpet pile length. For example, if you want the living-room rug left alone during mopping, consider the avoidance option. This is a Whentip decision example, not a guarantee of safe operation on every rug material or thickness. Check the rug's own care instructions too.

03

3. Open the carpet controls in SmartThings

Open SmartThings, select the robot, then go to Menu → Driving details settings → Carpet cleaning. Samsung's Korean guide presents options to clean with the mop raised, avoid carpets or clean automatically according to carpet pile length. English menu wording may differ. Note the existing selection before choosing the option that matches your goal. Changing the carpet control first, instead of several navigation settings together, makes comparison easier. Check the selection displayed before leaving the menu.

04

4. Observe the first run at the carpet edge

After changing the setting, observe what happens at the rug boundary. If you chose avoidance, watch how the path changes on approach. If you chose mop lifting, check whether the actual behavior matches your intention as the robot approaches the carpet. This is a check for you to perform in your own home, not a Whentip test result. If behavior remains unexpected, stop cleaning and record the model, selected option, carpet conditions and what happened for Samsung support. Choosing a mode is separate from diagnosing a sensor fault.

Sources & further reading

Samsung Electronics Service — 2026 Bespoke AI Steam floor recognition and carpet settings ↗

Some sources are in Korean. Check the original guidance for current product, store or software conditions.

Read this article in Korean →