← Living
Living

How to clean a Philips Sonicare toothbrush: check beneath the brush head

If your Philips Sonicare cleaning routine stops at rinsing the bristles, check the underside of the detached head and its connection to the handle. Separate daily care from weekly cleaning, remove toothpaste residue, and recognize when a vibration problem needs troubleshooting rather than more cleaning.

Storage baskets on a wooden shelf; reference photograph

Based on the sources linked below. The photograph is for illustration.

Before you start

STEP BY STEP

Here’s how

01

Separate daily rinsing from weekly cleaning

Philips advises rinsing the head and toothbrush after use and wiping the handle with a damp cloth. It also recommends a thorough weekly clean. Think of removing visible foam and inspecting hidden areas beneath the detached head as separate tasks. Choosing Sunday for the underside check is simply an example of a manageable routine. It does not mean leaving visible residue in place all week; check for it after use.

02

Remove the head and rinse its underside

Switch the brush off, remove the head as you would when replacing it, and rinse its underside with warm water. Look at the part that connects to the handle, not just the bristles that touch your teeth. If removal is difficult, consult your model's instructions first. Do not force the joint apart with a tool or excessive twisting. Removing the brush head is different from dismantling the handle.

03

Check the shaft and surrounding cover separately

Rinse the exposed metal shaft with warm water. Wipe the handle, including the cover around the shaft, buttons and base. Working visually from the connection down to the bottom helps you avoid stopping after cleaning only the bristles. Do not scrape hardened marks with a fingernail or pointed tool. Philips warns that sharp objects can damage the rubber cover and buttons.

04

Distinguish residue around the button from a fault

Philips' vibration troubleshooting also includes wiping accumulated toothpaste from around the power button with a damp cloth. Inspect the edges without inserting a tool or lifting the rubber. If the brush still does not vibrate, consult the charging and operating guidance for your model instead of repeatedly cleaning it. Philips advises seeking repair assistance when the power light is on but there is no vibration. Cleaning is not a universal repair.

05

Do not extend the rinsing method to the charger

The rinsing instructions here concern the specified parts of the toothbrush and head. They do not establish that a charger or travel case can be washed the same way. Check the accessory instructions for your particular model separately. Do not put the brush or its accessories in a dishwasher. Finish by checking the underside of the head, shaft area and button for anything you missed. Stay within the manual's guidance rather than adding cleaning chemicals on your own.

Sources & further reading

Philips — How to clean a Sonicare toothbrush ↗Philips — Sonicare toothbrush does not vibrate ↗

Some sources are in Korean. Check the original guidance for current product, store or software conditions.

Read this article in Korean →