← Tech
Tech

Turn off Chrome graphics acceleration to compare screen or pointer stutter under the same conditions

Disabling Chrome graphics acceleration is a diagnostic option, not a universal fix for stuttering. On Windows or Mac, record the original setting, restart Chrome after changing it, and compare the same page before deciding whether to keep the change.

A desk with a monitor, keyboard and mouse

Based on the sources linked below. The photograph is for illustration.

Before you start

STEP BY STEP

Here’s how

01

1. Separate an older report from your own symptoms

A Quasarzone question dated February 26, 2023 described pointer stuttering in Chrome and Edge on a 13700KF and 6900 XT system, with hardware acceleration disabled as a workaround. The author later reported that acceleration could be enabled again after changing another graphics setting. That is one person's experience on their setup at the time. Use it only as a reason to check whether the acceleration setting affects your symptoms, not as a diagnosis for every PC or graphics card. This guide changes Chrome settings only.

02

2. Record a repeatable action and the original setting

Note the page address and the action that triggers the problem, such as scrolling while the same video plays. When testing video, keeping the quality and window size unchanged is WhenTip's suggested comparison method. This is a check of your own setup, not a formal performance test. Save drafts and other work first. Chrome must restart later, which can interrupt active work. Also record whether acceleration is currently enabled before you change it.

03

3. Open System settings, disable acceleration and restart

In Chrome, open the top-right More menu, select Settings, then System on the left. Google's current instructions call the switch 'Use graphics acceleration when available.' Its troubleshooting article also uses the term hardware acceleration; these labels do not require looking for a separate feature. If acceleration is on, turn it off and restart Chrome. Do not compare an already-open page immediately after moving the switch. If it was already off, record that fact rather than repeating the same action.

04

4. Compare the same page and restore the setting if needed

After restarting, repeat the page and action you recorded. Avoid changing video quality or other settings at the same time, because that makes it harder to identify which change affected the result. If there is no improvement or another feature stops working properly, restore the original acceleration setting and restart again. Google requires graphics acceleration for some video-creation visual effects. Treat disabling it as a diagnostic option, and check the features you actually use.

05

5. If stuttering continues, compare browsers

Google recommends opening the problematic page in another browser. If the same issue occurs there, the website or network may also be involved; the Chrome acceleration switch alone cannot establish the cause. When asking for help, include the page address, the action that stutters, and results with acceleration on and off after restarting. Distinguish a temporary improvement from a confirmed fix. This procedure does not diagnose faulty drivers or hardware.

Sources & further reading

Quasarzone — Chrome and Edge acceleration stutter question and follow-up, February 26–27, 2023 ↗Google Chrome Help — Crashes, launch problems and hardware acceleration troubleshooting ↗Google Workspace Learning Center — Chrome graphics acceleration settings ↗

Some sources are in Korean. Check the original guidance for current product, store or software conditions.

Read this article in Korean →